Industrial Treatment RO System Filter Purification Plant Machine 500L Reverse Osmosis 10 tons
Product Description
The 10-ton reverse osmosis water treatment equipment is prepared according to the user's requirements, based on the principle of reliable system operation and reasonable economy, and adopting relevant design standards and specifications, combined with our company's many years of engineering experience.
The system adopts "pre-treatment + single-stage reverse osmosis" water treatment process.
This system adopts "pretreatment + single-stage reverse osmosis" water treatment process, the program design is reasonable, stable operation, the quality of produced water to meet the requirements, and has been used in many similar projects.
The program is well designed, stable in operation, and the quality of produced water meets the requirements, and has been applied and tested in many similar projects.
The equipment has the characteristics of easy installation, easy use, easy operation and easy maintenance; stable operation, energy saving, environmental protection, high degree of automation, economic and practical.
Parameter Table
| Model | Water Making Ability | Inlet Caliber | Effluent Caliber | Blowdown alCer | Size(mm) | Power |
| YSRO-0.5T | 0.5m3/h | DN20 | DN20 | DN15 | 1500×600×1500 | 1.3kw |
| YSRO-1T | 1m3/h | DN25 | DN25 | DN20 | 1700×600×1500 | 2.1kw |
| YSRO-2T | 2m3/h | DN32 | DN25 | DN20 | 2500×1000×1950 | 4.4kw |
| YSRO-3T | 3m3/h | DN40 | DN32 | DN25 | 2500×1200×2150 | 4.5kw |
| YSRO-5T | 5m3/h | DN50 | DN40 | DN32 | 2500×1350×2150 | 7.0kw |
| YSRO-8T | 8m3/h | DN50 | DN50 | DN40 | 3500×1500×2150 | 11kw |
| YSRO-10T | 10m3/h | DN50 | DN50 | DN40 | 3500×1600×2300 | 15kw |
Working Principle
1, reverse osmosis system design software;
2, raw water quality: raw water quality to meet the water quality standards for drinking water;
3, user requirements: water production ≥ 10m3 / h (25 ℃) water quality to meet the water quality standards for drinking water.
4, control equipment, measuring instruments and electrical equipment design, manufacturing in line with relevant regulations and standards.10 tons of reverse osmosis water treatment equipment process:
Maintenance
In reverse osmosis equipment (shèbèi) device (device) occurs when the high and low pressure alarm, you should first check the security filter (role: filtering impurities, etc.) to the high-pressure pump between the manual valve opening is too small, and then check the RO thick discharge valve and water inlet valve (using materials: cast iron, cast steel, stainless steel, etc.) is normal, and finally press the high and low pressure alarm reset button, restart the device. Ultrapure water purifier" water purifier is the use of pretreatment, reverse osmosis technology, ultra-purification treatment and post-treatment methods, the conductive medium in the water is almost completely removed, but also the water is not dissociated colloidal substances, gases and organic matter are removed to a very low degree of water treatment equipment. Ultrapure water meter TKA Measurement method: Accurate water distribution: from 0.01-99.9 liters, fully automatic volume precision control. Conductivity Measurement:Two high precision conductivity measurement cells, independently measure cell constants, every value measured is stored in the system, automatically calibrated and controlled, superior to every previous measurement method. Temperature measurement: Platinum chip sensor with an accuracy of +/- 0.1° C. Temperature compensation can be switched off, and the results are in accordance with the requirements of the United States Pharmacopoeia (USP) for optimal measurement reliability. On-line TOC measurement: Real-time on-line TOC monitoring for continuous and accurate measurement of the organic carbon content of the water in the range 1 - 99 ppb.
Product Display
|
|
Industrial Treatment RO System Filter Purification Plant Machine 500L Reverse Osmosis 10 tons Images
|
